污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
上海先鋒閥門廠
上海先鋒閥門廠
概述固定球閥的球體，采用上、下兩根閥桿固定，工作時，流體壓力不會使球體向閥座移動，閥座不會承受過大壓力而變形。SummaryThe sphere of Q47 type standing ball valve is fixed with upper and lower valve stems. When it works, for fluid pressure is unable to make ......
| 概述 固定球閥的球體，采用上、下兩根閥桿固定，工作時，流體壓力不會使球體向閥座移動，閥座不會承受過大壓力而變形。閥桿部份設有自潤滑軸承，減少磨擦，開關扭距小，兩閥座均采用彈簧設預緊。密封采用聚氟乙烯鑲入鋼圈內，鋼圈后部設有彈簧，保證閥座緊貼球體。當閥門中腔壓力異常升高超過彈簧頂緊力，閥座后退脫離球體，達到自動泄壓效果，壓后閥座自動復位。結構的性使固定球閥的密封性能穩定操作省力，使用壽命長，極適用于長輸管線和一般管線。 | Summary The sphere of Q47 type standing ball valve is fixed with upper and lower valve stems. When it works, for fluid pressure is unable to make sphere move towards valve base, the valve base won't be deformed for enduring over pressure. There is self-lubricating bearing seton the part of valve stem to reduce friction, and its switch-torque is small. Both valve bases are pertensioned by setting spring. Referring to sealing, adopt the way to inset polytetrafluoroethylene into steel-ring with a spring on its rear end, which can ensure valve base cling to sphere. When the cavity pressure in valve transnormally excesses spring tension, valve base will back off ａnd separate from sphere to get the effect of automatic pressure release.The valve base will automatically reset after being pressed. Thanks to advanced structure, the standing ball valve has stable sealing performance, labor-saved operation and long using life. It is es-pecially applicable for long conveymg pipeline and general pipeline. |
結構·功能·特點Construction．Functio．Features.
 | 全通徑設計 按照客戶的要求可以提供全通徑 或縮徑閥門，全通徑閥門具有與管子 內徑一致的通道直徑，減少渦流 便于清掃管道。 Full bore design According to the customer's demand,the fullbore orthe redu- ced bore can be provided. The f- ull bore valve has the diameter of channel completely equalto the in ner diameter of pipe to facilitat- e to clean the pipe. 阻塞與排泄功能 固定球閥采用彈簧預緊，閥座密 封為雙活塞．利用話塞原理密封．上 下游側的閥座使流體阻斷．閥體中腔 裝放空閥排空，閥底裝有排污閥排污， Block & Bleed Function Fixed ball valve adopts spri- ng to pretighten.And seat sealis double pistons.lt adopts piston p- rinciple to seaI.Upstr-Eam and d- ownstream seats make fluid stop. And the emptying valve installed on the middle cavity is used to e- mpty and the blowdown valve in- stalled at the bottom of valve to c- lear off dirt to facili-tate to clean the pipe. |  | 防火結構 萬一發生火災或異常升溫使PT FE軟化燒損時，閥座支承圈防火密封 面可以和球體接觸．起到密封作用且 符合AP1607和AP16FA Fire-proof structure When the fire happens orthe temperatue unusually rises to m- ake PTFE soften to damage.the fireproof sealsurface of seat su- pported circle can contact with b- all to have seal function.This co- nforms to therequirements of A- Pl 607 and AP16FA. 防靜電設計 采用鉻鎳不銹鋼的彈簧和小球使 球體、閥桿和閥體之間相互導電，從 而把靜電釋放。 Anti-static design Chrome and nickelstainless- teel spring and small ball are ad- opted to make electroconductive among ball. Stem and body to co- mpletely releasestatic. |
| 設計、制造標準 1、設計、制造按GB/T12237-89 2、連接法蘭JB/T 79-94 3、閥門檢查和試驗按GB/T13927-89 | Standard for design and manufacture 1、DesignManafacfure According to GB/T 12237-89 2、FlangeDimensionAccording tojBfT 79-94 3、valve Check and Test According to GB/T 13927-89 |
主要零件材料Mater for main parts
| 公稱壓力Nominal PN(MPa)pressura | 產 品 型 號Product Type | ||||||||||
| 主要零件材料 Parts Material | 閥體 Body | WCB | ZG1Cr18Ni9Ti | CF8 | CF3 | ZG1Cr18Ni- 12Mo2Ti | CF8M | CF3M | |||
| 球體、閥桿 Ball,Stem | 2Cr13 | 1Cr18Ni9Ti | 0Cr19Ni9- （304） | 00Cr19Ni11- （304L） | 1Cr18Ni12- Mo2Ti | 0Cr17Ni12- Mo（316） | 00Cr19Ni14- Mo2（316L） | ||||
| 閥座 Seat | 四氟乙烯、對位聚苯 | ||||||||||
| 適用工況 Applicable Condrtion | 適用介質 Applicable mediumt | 水、蒸汽、油品等 Water，Steam，Oil | 硝酸等腐蝕性介質 Netricalid Corrosive | 強氧化性介質 Oxgen medium | 醋酸等腐蝕性介質 Acetil acid coirosive medium | 尿素等腐蝕性介質 Urea corrosive medium | |||||
| 工作溫度（℃） Working Temperatdre | -29~150(四氟乙烯) -28~300(對位聚葳) | ||||||||||
| 試驗壓力 （MPa） Test pressure | 殼體 Shell | 1.5培 | |||||||||
| 密封（液） Sesl（liquid） | 1.1培 | ||||||||||
| 密封（氣） Sesl（gas） | 0.6MPa | ||||||||||
| 蝸輪傳動 Turbine | 在手動型號的Q后插“3"表示，示例：Q347F-16C Represeting by“3"inserted befere manual“Q" | ||||||||||
| 氣動 Pheumatic | 在手動型號的Q后插“6"表示，示例：Q647F-16C Represetingby“6"inserted befere manual“Q" | ||||||||||
| 電動 Electric | 在手動型號的Q后插“9"表示．示例：Q947F-16C Represeting by“9"inserted befere manual“Q" | ||||||||||
| 附注 Remark | 選用縮徑球閥，在公禰通徑數值后加S表示，示例：DN100S Selecting reduce Bore,insert“S"affer figure of DN. | ||||||||||
如用戶選用美標的閥門請在型號前加A．選用的壓力為150Lb、300Lb、600Lb。
主要外形及連接尺寸Q647(F、N、P)-40(4.0MPa)Mani Outline and Connecting Flangs Size
| 公稱通徑 DN Nominal Size | 外形尺寸Outline Size | 連接法蘭尺寸Connecting Flangs Size | 雙作用式* 執行器型號 Actuator Model of Double-acting Type | |||||||
|
L |
L1 |
H |
D |
D1 |
D2 |
C |
f |
n-Φd | ||
| 50 | 178 | 190 | 260 | 165 | 125 | 99 | 20 | 3 | 4-Φ18 | GTD80 |
| 65 | 190 | 210 | 293 | 185 | 145 | 118 | 20 | 3 | 4-Φ18 | GTD90 |
| 80 | 203 | 247 | 323 | 200 | 160 | 132 | 20 | 3 | 8-Φ18 | GTD100 |
| 100 | 229 | 276 | 382 | 220 | 180 | 156 | 22 | 3 | 8-Φ18 | GTD115 |
| 125 | 356 | 348 | 468 | 250 | 210 | 184 | 22 | 3 | 8-Φ18 | GTD145 |
| 150 | 394 | 378 | 510 | 285 | 240 | 211 | 24 | 3 | 8-Φ22 | GTD160 |
| 200 | 457 | 524 | 655 | 340 | 295 | 266 | 24 | 3 | 12-Φ22 | GTD210 |
| 250 | 533 | 645 | 847 | 405 | 355 | 319 | 26 | 3 | 12-Φ22 | GTD255 |
| 300 | 610 | 715 | 980 | 460 | 410 | 370 | 28 | 4 | 12-Φ22 | GTD300 |
| 350 | 686 | 795 | 1085 | 520 | 470 | 429 | 30 | 4 | 12-Φ22 | GTD350 |
| 400 | 762 | 1860 | 1215 | 580 | 525 | 480 | 32 | 4 | 12-Φ22 | AW35 |
| 500 | 991 | 1860 | 1385 | 715 | 650 | 609 | 36 | 4 | 12-Φ22 | AW40 |
※注：系列球閥結構長度及連接法蘭尺寸可根據JB/T79標準或用戶要求設計制造。
※注：*根據不同閥門扭矩、使用介質適配或單作式的執行器型號可能有所不同，相關尺寸隨之變化。
Note:*The relative siZes are subject to change responding to the difference in
valve torque,medium and model of single-acting actuator.Pneumatic actuator of GT series may fit ball valves of DN 15-350,ａnd that of AW series may fit ball valves of DN 150~500,P19
主要外形及連接尺寸Q647(F、N、P)-(2.5MPa)
| 公稱通徑 DN Nominal Size | 外形尺寸Outline Size | 連接法蘭尺寸Connecting Flangs Size | 雙作用式* 執行器型號 Actuator Model of Double-acting Type | |||||||
|
L |
L1 |
H |
D |
D1 |
D2 |
C |
f |
n-Φd | ||
| 50 | 216 | 210 | 270 | 165 | 125 | 99 | 20 | 3 | 4-Φ18 | GTD90 |
| 65 | 241 | 247 | 309 | 185 | 145 | 118 | 22 | 3 | 4-Φ18 | GTD100 |
| 80 | 283 | 276 | 344 | 200 | 160 | 132 | 24 | 3 | 8-Φ18 | GTD115 |
| 100 | 305 | 348 | 421 | 235 | 190 | 156 | 24 | 3 | 8-Φ22 | GTD145 |
| 125 | 381 | 378 | 485 | 270 | 220 | 184 | 26 | 3 | 8-Φ26 | GTD160 |
| 150 | 403 | 432 | 559 | 300 | 250 | 211 | 28 | 3 | 8-Φ26 | GTD190 |
| 200 | 502 | 524 | 655 | 360 | 310 | 274 | 30 | 3 | 12-Φ26 | GTD210 |
| 250 | 568 | 648 | 847 | 425 | 370 | 330 | 32 | 3 | 12-Φ30 | GTD255 |
| 300 | 648 | 715 | 980 | 485 | 430 | 389 | 34 | 4 | 16-Φ30 | GTD300 |
| 350 | 762 | 795 | 1085 | 555 | 490 | 448 | 38 | 4 | 16-Φ33 | GTD350 |
| 400 | 838 | 1860 | 1215 | 620 | 555 | 503 | 40 | 4 | 16-Φ36 | AW35 |
| 500 | 991 | 1860 | 1385 | 730 | 660 | 609 | 44 | 4 | 20-Φ36 | AW40 |
主要外形及連接尺寸Q647(F、N、P)-40(4.0MPa)Mani Outline and Connecting Flangs Size
| 公稱通徑 DN Nominal Size | 外形尺寸Outline Size | 連接法蘭尺寸Connecting Flangs Size | 雙作用式* 執行器型號 Actuator Model of Double-acting Type | ||||||||
|
L |
L1 |
H |
D |
D1 |
D2 |
D3 |
C |
f |
n-Φd | ||
| 50 | 216 | 247 | 286 | 165 | 125 | 99 | 88×4 | 20 | 3 | 4-Φ18 | GTD100 |
| 65 | 241 | 276 | 330 | 185 | 145 | 118 | 110×4 | 22 | 3 | 4-Φ18 | GTD115 |
| 80 | 283 | 348 | 349 | 200 | 160 | 132 | 121×4 | 24 | 3 | 8-Φ18 | GTD125 |
| 100 | 305 | 378 | 421 | 235 | 190 | 156 | 150×4.5 | 24 | 3 | 8-Φ22 | GTD145 |
| 125 | 381 | 432 | 485 | 270 | 220 | 184 | 176×4.5 | 26 | 3 | 8-Φ26 | GTD160 |
| 150 | 403 | 524 | 582 | 300 | 250 | 211 | 204×4.5 | 28 | 3 | 8-Φ26 | GTD210 |
| 200 | 502 | 648 | 702 | 375 | 320 | 284 | 260×4.5 | 30 | 3 | 12-Φ26 | GTD255 |
| 250 | 568 | 715 | 895 | 450 | 385 | 345 | 313×4.5 | 32 | 3 | 12-Φ30 | GTD300 |
| 300 | 648 | 795 | 1040 | 515 | 450 | 409 | 364×4.5 | 34 | 4 | 16-Φ30 | GTD350 |
| 350 | 762 | 1860 | 1170 | 580 | 510 | 465 | 422×5 | 38 | 4 | 16-Φ33 | AW35 |
| 400 | 838 | 1860 | 1215 | 660 | 585 | 535 | 474×5 | 40 | 4 | 16-Φ36 | AW40 |
| 500 | 991 | - | - | 755 | 670 | 615 | 576×5 | 44 | 4 | 20-Φ36 | AW50 |
※注：系列球閥結構長度及連接法蘭尺寸可根據JB/T79標準或用戶要求設計制造。
※注：*根據不同閥門扭矩、使用介質適配或單作式的執行器型號可能有所不同，相關尺寸隨之變化。
Note:*The relative siZes are subject to change responding to the difference in
valve torque,medium and model of single-acting actuator.Pneumatic actuator of GT series may fit ball valves of DN 15-350,ａnd that of AW series may fit ball valves of DN 150~500,P19
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
