浪涌電容器的設計是為了改變陡峭的前波，防止損壞旋轉機器和變壓器的匝間絕緣。建議將避雷器與浪涌電容單元一起使用，形成一個全面的保護包(請聯系您的ABB銷售代表以獲取更多信息)。此處顯示標準額定值和尺寸;但是，特殊要求可以在延長的交貨期上得到滿足。
2GUS電容器適用于的條件，并提供:
耐瞬態電壓高
長壽命設計
低損耗電介質
堅固的建筑

規范
低損耗聚丙烯薄膜和鋁箔
非pcb介質流體
FARADOL 800
放電電阻減少
剩余電壓小于50v
五分鐘后斷電
專為室內/室外使用
具有環境溫度范圍
-40°C至+50°C
不銹鋼外殼
ANSI 70淺灰色涂料

Surge capacitors are designed to modify the steep fronted waves and prevent damage to the turn-toturn insulation of rotating machines and transformers. It is advisable to use surge arresters together with the surge capacitor units to form a comprehensive protective package (please contact your ABB sales representative for further information). Standard ratings and dimensions are shown here; however,special requirements can be accommodated on an extended lead-time.
The 2GUS capacitors are built for the most demanding conditions and offer:
High transient voltage withstand
Long life design
Low loss dielectric
Rugged construction

SPECIFICATIONS
Low-loss polypropylene film and aluminum foil
Non-PCB dielectric fluid—
FARADOL 800
Discharge resistors to reduce the
residual voltage to less than 50 V
in 5 minutes of de-energization
Designed for indoor/outdoor use
with an ambient temperature range
of -40°C to +50°C
Stainless steel case
ANSI 70 light gray paint