黃先生
您好, 歡迎來到環保在線! 登錄| 免費注冊| 產品展廳| 收藏商鋪|
行業產品
當前位置:安徽萬邦特種電纜有限公司>>特種電纜>> ?特種電纜額定電壓U0推薦值
參 考 價 | 面議 |
產品型號
品 牌
廠商性質生產商
所 在 地
更新時間:2024-07-29 07:42:54瀏覽次數:122次
聯系我時,請告知來自 環保在線黃先生
特種電纜額定電壓U0推薦值
Table1 The recommended figure of U0
系統電壓Um/ kV The maximum system voltage | 額定電壓/Kv Rated Voltage/ kV | |
A類、B類 System categories A and B | C類 Systems categories C | |
1.2 | 0.6 | 0.6 |
1、 導體額定工作溫度The rated temperature of conductor
電纜導體的額定工作溫度為:交聯聚乙烯絕緣90℃,聚氯乙烯絕緣70℃.
The maximum assigned temperature of the cable conductor is : XLPE insulated is 90℃, PVC insulated is70℃.
短路時(最長持續時間不超過5s)電纜導體的溫度不超過: 交聯聚乙烯絕緣250℃, 聚氯乙烯絕緣160℃。
During having a short circuit, lasting less than 5 seconds, the maximum temperature of the cable conductor shall not be above: XLPE insulated is 250℃, PVC insulated is160℃
2、 敷設環境溫度Ambient temperature for laying
電纜敷設時的環境溫度應不低于0℃,否則需要事先預熱。
During the cable laying, the ambient temperature must be above 0℃,if not the cable need be preheated.
3、 安裝彎曲半徑The bend radius
安裝時電纜最小彎曲半徑見表2.
The minimum bending diameter must be above the following standard:
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,環保在線對此不承擔任何保證責任。
溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。