1050 nm SLD大功率光源模塊(大功率SLD光源模塊) 我們的主要產品是波長從650nm到1620nm具有不同譜帶的單模尾纖SLD模塊。 我們正在為不同的應用制造制冷(有制冷器和電熱調節器)和非制冷的模塊，像光纖陀螺儀、OCT、光纖組件測試、光計量學和大量的其它模塊。我們也提供自由空間模塊，特別是用于原子力顯微術，但也包括無斑紋照明、白光干涉測量、光學試驗和測量以及其它模塊。 Model number：SLD-53-HP 特征： - very high output power, up to 30 mW ex SM fiber - up to 75 mW free space output on request - flat spectrum with small residual Fabry-Perot modulation depth 封裝： - fiber coupled – Butterfly, DIL - free space – TOW 應用： - optical sensing - optical coherence tomography - optical measurements Additional & customized: - PD - monitors - FC/APC terminated pigtails - SM or PM pigtails (polarized or depolarized output emission ex PM fiber) 技術指標 | Parameter | Category | Min | Typ. | Max | | Output power, emitter @ +25 °C SLD-531-HP SM fiber pigtailed | HP1 | - | - | 10.0 | | HP2 | - | - | 20.0 | | HP3﹡ | - | - | 30.0 | | Output power, mW, emitter @ +25 °C, Glass Window SLD-530-HP** | HP1 | - | - | 20.0 | | HP2 | - | - | 40.0 | | HP3﹡ | - | - | 60.0 | | Forward current, mA | HP1 | - | 200 | 350 | | HP2 | - | 250 | 400 | | HP3﹡ | - | 350 | 400 | | Forward voltage, V | All | - | - | 2.2 | | Peak wavelength, nm | All | 1040 | | 1060 | | Spectrum width, FWHM, nm | HP1, | 25 | 30 | 60 | | HP2 | 30 | 35 | 60 | | HP3* | 30 | 35 | 40 | | Slow / fast polarization ratio (PM modules), dB*** | All | 5.0 | - | - | | Residual spectral modulation depth, % | All | - | 2.0 | 5.0 | | Secondary coherence subpeaks, ( Reflectivity ), dB (10 log) | All | - | -25 | - | | Operating temperature range(case), °C**** | All | -55 | - | +75 | | Cooler current, A | All | - | - | 1.2 | | Cooler voltage, V | All | - | - | 3.5 | * SLD- modules of HP3 power category are available in engineering quantity; ** TOW packaged SLDs; *** LYOT depolarized versions are available upon request **** Butterfly packaged SLDs Following marking should be used for ORDERING: SLD-53(a)-(b)-(c)-(d)-(e) Where: a = 0 (free space) or 1 (fiber pigtailed) b = power category (HP1...HP3) c = package type d = SM (isotropic) or PM (polarization maintain) fiber (pigtailed versions only) e = PD (if PD monitor is required) Example : SLD-531-HP1-DBUT-SM-PD 10-3 maximum feedback is allowed to run HP SLDs safely at full power. A lot of customized solutions are available – contact us with your detailed requirements! | 
