960nm大功率SLD模塊(SLD大功率光源模塊) 我們的主要產品是波長從650nm到1620nm具有不同譜帶的單模尾纖SLD模塊。 我們正在為不同的應用制造制冷(有制冷器和電熱調節器)和非制冷的模塊，像光纖陀螺儀、OCT、光纖組件測試、光計量學和大量的其它模塊。我們也提供自由空間模塊，特別是用于原子力顯微術，但也包括無斑紋照明、白光干涉測量、光學試驗和測量以及其它模塊。 Model number：SLD-48-HP 特征： - very high output power, up to 30 mW ex SM fiber, 60 mW free space - three power categories - negligible residual Fabry-Perot modulation depth - very low secondary coherence subpeaks at full power 封裝： - fiber coupled: Butterfly, DIL - free space: TOW 應用： - optical sensing - optical coherence tomography - optical measurements Additional & customized: - PD - monitors - FC/APC terminated pigtails - PM pigtails (polarized or Lyot-depolarized output) 技術指標 | Parameter | Category | Min | Typ. | Max | | Output power, emitter @ +25 °C SLD-48-HP SM fiber pigtailed | HP1 | - | - | 10.0 | | HP2 | - | - | 20.0 | | HP3﹡ | - | - | 30.0 | | Output power, mW, emitter @ +25 °C, Glass Window SLD-48-HP** | HP1 | - | - | 30.0 | | HP2 | - | - | 45.0 | | HP3﹡ | - | - | 60.0 | | Forward current, mA | HP1 | - | 130 | 200 | | HP2 | - | 210 | 270 | | HP3﹡ | - | 300 | 400 | | Forward voltage, V | All | - | - | 2.8 | | Peak wavelength, nm | All | 945 | 960 | 970 | | Spectrum width, FWHM, nm | HP1, | 25 | 35 | - | | HP2 | 25 | 30 | - | | HP3* | - | 30 | - | | Slow / fast polarization ratio (PM-polarized modules), dB*** | All | 5 | 10 | - | | Residual spectral modulation depth, % | All | - | 2.5 | 5.0 | | Secondary coherence subpeaks, dB (10 log) | All | - | -25 | - | | Operating temperature range(case), °C**** | All | -55 | - | +75 | | Cooler current, A | All | - | - | 1.2 | | Cooler voltage, V | All | - | - | 3.5 | * SLD modules of HP3 power category are available in engineering quantity; ** TOW packaged SLDs; *** Lyot depolarized versions are available upon request **** Butterfly packaged SLDs Attention: Spectrum peaked around 960 nm is not guaranteed if not specially requested! Following marking should be used for ORDERING: SLD-48(a)-(b)-(c)-(d)-(e) Where: a = 0 (free space) or 1 (fiber pigtailed) b = power category (HP1, HP2, HP3) c = package type d = SM (isotropic) or PM (polarization maintain) fiber (pigtailed versions only) e = PD (if PD monitor is required) Example: SLD-481-HP1-DBUT-SM-PD 10-3 maximum feedback is allowed to run HP series SLDs safely at full power. | 
