Main features:
主要特點
1) Can pull in the required high tem. to sample to get a rapid heating rate; also pull out the high tem. furnace and let the sample in the room tem. Environment to get a rapid cooling rate.
操作時可將實驗需要的恒定高溫直接推到樣品處，使樣品能得到一個快速的升溫速度，同樣也可將高溫的管式爐直接推離樣品處，使樣品直接暴露在室溫環境下，得到快速的降溫速率。
2) Used for graphene growing or CVD experiment with RTP requirement
應用于有快速升溫需要的石墨烯生長或CVD實驗。
Technical Parameters
技術參數
Power 輸入電源 | · Power rated: 3KW · 額定功率：3KW |
Voltage 電壓 | · Voltage rated: AC208-240V 50/60HZ · 額定電壓： AC208-240V 50/60HZ |
Working Temperature 工作溫度 | · Max. Temperature: 1200 °C ( 1 hr) Z高溫度：1200℃ (1小時) · Continuous working temperature: ≤1100℃ 持續工作溫度：≤1100℃ · Max. Heating/colling Rate: ≤20°C /S Z大升/降溫速率：≤20℃/秒 |
控溫方式 | · PID automatic control and auto-tune function. 模糊PID控制和自整定調節 · 30 programmable segments for precise thermal processing. 智能化30段可編程控制 · Built-in protection for the over-heated and broken thermocouple. 超溫和斷偶報警功能 |
Length of heating zone 加熱區長度 | · 200+200mm |
Length of constant zone 恒溫區長度 | · 100+100mm |
Heating Elements 加熱元件 | · Resistance wire, Fe-Cr-Al Alloy doped by Mo · 電阻絲（摻鉬鐵鉻鋁合金） |
Temperature Accuracy 控溫精度 | +/- 1 °C |
· Φ50/60/80/100*1400mm(optional) · Φ50/60/80/100*1400mm(管徑可選) · Two tube blocks are included for blocking heat radiation generated from tube center.,must be fully inserted into the furnace chamber before heating(quartz and ceramic optional). · 兩個氧化鋁管堵阻擋管中心產生的熱輻射，管堵必須在加熱前塞進爐膛的正確位置（石英和氧化鋁管堵可選） | |
Dimensions 尺寸 | · Furnace size : 1500*380*620mm(L*W*H without tube & flange) · 爐子尺寸：1500*380*620mm(長*寬*高 不含爐管和法蘭)
|
Net Weight 凈重 | 130kg |
真空法蘭 | · KF25 quick clamp flange 兩端為KF25快速卡箍法蘭
|
Vacuum Pressure 真空壓力 | · 133torr can be achieved by mechanical pump 機械泵可達133torr（1pa） · 10^-6 torr can be reached by molecular pump 分子泵可達10^-6torr（10^-3pa） · Please click the picture below to order vacuum parts 點擊下列圖片訂購真空部件
|
Warranty 質保 | One year limited warranty with lifetime support (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年質保終身支持（消耗品如爐管，石英管堵，O型圈等不在質保范圍內） |
Warning 注意事項 | · Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. · 在使用過程中爐膛表面可能出現細小裂紋。這是正常情況，裂紋可以用氧化鋁涂層修復。 |
Compliance 認證 | · CE Certified CE認證 · The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost. 可付費進行TUV(UL61010)或CSA認證 |
Operation instructions 操作指導 | · Click to download the operating manual · 點擊下載說明書
|
環保在線