污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
英菲洛精密科技（蘇州）有限公司
英菲洛精密科技（蘇州）有限公司
德國MW顯微鏡電動平臺/顯微鏡自動平臺品牌：MRZHUSER WETZLARScanning Stage SCAN 75 50 for Upright MicroscopesTravel range max. 76 52 mmTravel speed max. 25 mm/s （with 1 mm ball screw pitch）max. 50
德國MW顯微鏡電動平臺/顯微鏡自動平臺
品牌：MÄRZHÄUSER WETZLAR
Scanning Stage SCAN 75 × 50 for Upright Microscopes
Travel range max. 76 × 52 mm
Travel speed max. 25 mm/s (with 1 mm ball screw pitch)
max. 50 mm/s (with 2 mm ball screw pitch)
Repeatability < 1 μm (bi-directional)1
Accuracy ±3 μm1
Resolution 0.01 μm (smallest step size)
Orthogonality < 10 arcsec
Motor 2-phase stepper motor
Limit switches optical light beams
Stage opening 116 × 116 mm
Material / surface aluminium / anodic coating, black laquered
Weight approx. 2.6 kg (without stage insert)
Scanning Stage SCAN 100 x 100 for Upright Microscopes
Travel range: 100 x 100 mm (4" x 4")
Repeatability: < 1 μm
(bi-directional, measured according to VDI / DGQ 3441)
Accuracy: +/- 3 μm (measured according to VDI / DGQ 3441)
Resolution: 0,01 μm (smallest step size)
Orthogonality: < 10 arc sec
Motor: 2-phase stepper motor
Max. travel speed: 60 mm/s, with 1 mm ball screw pitch
120 mm/s, with 2 mm ball screw pitch
240 mm/s, with 4 mm ball screw pitch
Limit switches: optical light beam
Material: aluminium
Surface: anodic coating, black laquered
Weight: 4,400 g
MW電動平臺三軸控制手柄
3-Axis Joystick for TANGO Controllers
Number of axes 3 (XYZ)
Interface 15-pin HD D-Sub plug
connection to TANGO HDI
Material/suface control panel: membrane keyboard
housing: ABS-plastic with haptic coating
housing bottom: stainless steel
Dimensions 229 x 122 x 96 mm (L x W x H)
Weight approx. 1.0 kg
MW電動平臺控制箱
controls 3 motor axes (XYZ)
position resolution: 819,200 micro-steps/revolution
up to 70 motor revolutions / sec
manual operation by Joystick, ERGODRIVE or Trackball (please order separay)
standard interfaces: RS-232 and USB
optional interfaces for closed-loop operation:
MR, 1Vpp, RS-422 or TTL (on request)
Z軸自動調焦機構
MFD-2
For supplementary motorization of the Z-axis the focus drive MFD-2 is simply positioned on the fine focus knob of the microscope.
A stable and accurate positioning is ensured by the additional adaptation of the base plate.
更大行程具體型號請銷售商！
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
