牌號 Trade Name | 直徑 Diameter | HRC （國家標準臺式硬度計） | 特點及主要用途 characteristicsandapplication |
| HB-YD114(Q) | 1.6 | 50-55 (受強烈沖擊后 After high impact) | 高錳鋼堆焊焊絲，受強烈沖擊后，表面具有加工硬度的特點。 High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
| HB-YD115(Q) | 1.6 | 50-55 (受強烈沖擊后After high impact) | 用于受嚴重沖擊高錳鋼堆焊，加工硬化*。 Applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
| HB-YD165(Q) | 1.6 | 60-65 | 高硬度耐磨焊絲，適用于磨粒磨損表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
| HB-YD172(Q) | 1.6 | ≥40 | 用于堆焊齒輪、挖泥斗、礦山機械等磨損件 Applied to repair surface of high impact wear parts, such as gear aud bucket and mining machinery. |
| HB-YD207(Q) | 1.6 | ≥50 | 用于堆焊推土機刀片，螺旋槳等磨損零件 Applied to repair surface of high wear parts, such as bulldozer blade and propeller. |
| HB-YD212(Q) | 1.2/1.6 | ≥50 | 用于堆焊各種受磨損的機件表面，如齒輪、挖斗、礦山機械 Applied to repair surface of wear parts, such as gear mud bucket and mining machinery. |
| HB-YD256(Q) | 1.6 | HB≥170 | 高錳鋼堆焊，適用于破碎機等受沖擊磨損部位的堆焊 High-manganese steelhardfacing flux-cored Wires,it is applied to repair surface of high impact wear parts, such as Crusher. |
| HB-YD258(Q) | 1.6 | 55-60 | 用于耐磨表面堆焊 Applied to repair surface of wear parts. |
| HB-YD265(Q) | 1.6 | 60-65 | 高硬度耐磨焊絲，適用于磨粒磨損表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
| HB-YD322(Q) | 1.6 | ≥55 | 用于堆焊各種沖模及切削刃具，兼用于修復要求耐磨損性能較高之機械零件 Applied to repair surface ofhigh wear resistanceparts, such as die and cuttingcutlery. |
| HB-YD327A(Q) | 1.6 | ≥55 | 專門用于模具堆焊，耐磨性能高于D322 Used tomouldsurfacing, wear resistance is better than D322. |
| HB-YD337(Q) | 1.6 | ≥48 | 用于鑄鋼或鍛鋼上堆焊鍛模 Applied to repairfo r g ing dieatcast steelorfo r g ing steel. |
| HB-YD397(Q) | 1.6 | ≥40 | 用于堆焊鑄鋼或鍛鋼做坯體的熱鍛模或堆焊高強度耐磨件 Applied to repair hotfo r g ing dieatcast steelor fo r g ing steel, or highstrengthwear surfacing. |
| HB-YD405A(Q) | 1.6 | 50-59 | 用于熱軋輥開坯輥堆焊 Applied to repair hot-rolling blooming rollor. |
| HB-YD430A(Q) | 1.6 | 20-35 | 打底層堆焊焊絲 A backing hardfacing flux-cored Wires |
| HB-YD488A(Q) | 1.6 | 45-50 | 用于軋輥堆焊 Applied to repair rollor |
| HB-YD507Mo(Q) | 1.6 | 35-45 | 用于510℃以下中高壓閥門堆焊 Applied to valve which operating temperature is less than 510℃. |
| HB-YD518(Q) | 1.6 | 40-50 | 用于連鑄輥堆焊 Applied to repaircontinuous caster roller |
| HB-YD688(Q) | 1.6 | 50-60 | 用于磨煤輥打底焊(韌性好，可以多層堆焊) Used to coal roller backing welding. |
| HB-YD788(Q) | 1.6 | 55-62 | 硬度高，可以多層堆焊。 High hardness andmulti-layer welding |
| HB-YD888(Q) | 1.2, 1.6 | 60-65 | 硬度高，堆焊層厚度不超過6mm。 High hardness, but thethicknessofsurfacing layeris less than 6mm. |
| HB-YD888Ni(Q) | 1.2 | 58-65 | 高鉻合金焊絲，用于耐磨表面堆焊 Applied to repair surface of wear parts. |
| HB-YD988(Q) | 1.6 | 55-63 | 高鉻合金焊絲，用于耐磨表面堆焊 Applied to repair surface of wear parts. |
| HB-YD990(Q) | 1.6 | 55-65 | 用于高溫耐磨堆焊。 Applied to repair surface ofhigh temperaturewear parts. |
| HB-YD58(Q) | 1.6 | 55-60 | 高溫耐磨焊絲，用于化推焦機磨靴的堆焊。 high temperaturewear hardfacing wires, |
| HB-YD67(Q) | 1.6 | 58-63 | 用于耐磨表面堆焊 Applied to repair surface of wear parts. |
| HB-YD95(Q) | 1.6 | 55-63 | 高鉻合金焊絲，用于耐磨表面堆焊 Applied to repair surface of wear parts. |
| HB-DG7(Q) | 1.6 | 52-60 | 地鐵盾構施工*刃口堆焊，也可用于煤碳石裝載機料斗和刃口堆焊修復。 Applied to repair surface of high impact wear parts, such as shiled machine, excavator bucket and hopper of mining machinery products. |
