污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
廣州乘方自動化設備有限公司
參 考 價 | 面議 |
產品型號ADM52C
品 牌
廠商性質經銷商
所 在 地廣州市
聯系方式:楊林查看聯系方式
更新時間:2022-07-18 11:15:26瀏覽次數:210次
聯系我時,請告知來自 環保在線輸入端子類型連接器類型
模型ADM51T(* 1)ADM52T(* 1)ADM51C ADM52C
觸點額定阻性負載/電感性負載:30 V DC,100mA以下
脈沖寬度0.1?7200 S:設置在脈沖式的時間,脈沖寬度模式
脈沖寬度分辨率20毫秒
電流消耗600毫安或更低(5.0伏直流)
項目特定網絡陽離子
輸入端子類型連接器類型
模型ADM51T(* 1)ADM52T(* 1)ADM51C ADM52C
SUF科幻X代碼-1:在上線維護復位動作
-2:在在線維護保持動作(* 2)
的I / O號點16點32點16點32點
輸出信號晶體管的接觸
觸點額定阻性負載/電感性負載:30 V DC,100mA以下
脈沖寬度0.1?7200 S:設置在脈沖式的時間,脈沖寬度模式
脈沖寬度分辨率20毫秒
電流消耗600毫安或更低(5.0伏直流)
功能
狀態輸出脈沖式輸出脈寬輸出
時間比例ON / OFF
的ON / OFF狀態脈沖類型的輸出狀態單次時脈幅輸出功能時間功能輸出功能比例ON / OFF
信號隔離
每個點共負側每隔16分
每個點共負側每隔16分
安裝方式安裝在I / O模塊巢
如何連接的連接用M4螺釘I / O模塊窩端
KS2或KS3電纜
KS9或KS10電纜
CPU停止?fàn)顟B(tài)/通訊總線終止?fàn)顟B(tài)
檢測時間和輸出模式可以選擇所述異常檢測模式時進行設置。
接線板 - TE16 TE32
* 1:選項代碼“/ CE1",以符合EMC標準。
* 2:ADM51T-2的輸出保持動作,ADM52T-2,ADM51C-2,ADM52C-2,為有效狀態輸出模式。
項目特定網絡陽離子
輸入端子類型連接器類型
模型ADM51T(* 1)ADM52T(* 1)ADM51C ADM52C
SUF科幻X代碼-1:在上線維護復位動作
-2:在在線維護保持動作(* 2)
的I / O號點16點32點16點32點
輸出信號晶體管的接觸
觸點額定阻性負載/電感性負載:30 V DC,100mA以下
脈沖寬度0.1?7200 S:設置在脈沖式的時間,脈沖寬度模式
脈沖寬度分辨率20毫秒
電流消耗600毫安或更低(5.0伏直流)
功能
狀態輸出脈沖式輸出脈寬輸出
時間比例ON / OFF
的ON / OFF狀態脈沖類型的輸出狀態單次時脈幅輸出功能時間功能輸出功能比例ON / OFF
信號隔離
每個點共負側每隔16分
每個點共負側每隔16分
安裝方式安裝在I / O模塊巢
如何連接的連接用M4螺釘I / O模塊窩端
KS2或KS3電纜
KS9或KS10電纜
CPU停止?fàn)顟B(tài)/通訊總線終止?fàn)顟B(tài)
檢測時間和輸出模式可以選擇所述異常檢測模式時進行設置。
接線板 - TE16 TE32
* 1:選項代碼“/ CE1",以符合EMC標準。
* 2:ADM51T-2的輸出保持動作,ADM52T-2,ADM51C-2,ADM52C-2,為有效狀態輸出模式。
Item | Speci?cations | |||
Type | Terminal type | Connector type | ||
Model | ADM51T (*1) | ADM52T (*1) | ADM51C | ADM52C |
Suf?x codes | -1 :Reset action during on-line maintenance -2 :Hold action during on-line maintenance (*2) | |||
No. of I/O points | 16 points | 32 points | 16 points | 32 points |
Output signal | Transistor contact | |||
Contact rating | Resistive load/Inductive load: 30 V DC, 100 mA or less | |||
Pulse width | 0.1 to 7200 s: Setting at time of pulse type, pulse width mode | |||
Pulse width resolution | 20 ms | |||
Current consumption | 600 mA or less (5.0 V DC) | |||
Function Status output Pulse type output Pulse width output Time proportional ON/OFF | Output function of ON/OFF status Pulse type output function of status One-shot pluse width output function Time proportional ON/OFF | |||
Signal isolation | Each point | Common minus side every 16 points | Each point | Common minus side every 16 points |
How installed | Installed in the I/O module nest | |||
How connected | Connected to the I/O module nest terminal with M4 screws | KS2 or KS3 cable | KS9 or KS10 cable | |
CPU halt status / Communi- cation bus termination status | Detection time and output mode can be set when selecting the abnormal detection mode. | |||
Terminal board | - | TE16 | TE32 |
*1: Specify the option code “/CE1" to comply with the EMC Standards.
*2: Output hold action of ADM51T-2, ADM52T-2, ADM51C-2, ADM52C-2, is effective in status output mode.
Item | Speci?cations | |||
Type | Terminal type | Connector type | ||
Model | ADM51T (*1) | ADM52T (*1) | ADM51C | ADM52C |
Suf?x codes | -1 :Reset action during on-line maintenance -2 :Hold action during on-line maintenance (*2) | |||
No. of I/O points | 16 points | 32 points | 16 points | 32 points |
Output signal | Transistor contact | |||
Contact rating | Resistive load/Inductive load: 30 V DC, 100 mA or less | |||
Pulse width | 0.1 to 7200 s: Setting at time of pulse type, pulse width mode | |||
Pulse width resolution | 20 ms | |||
Current consumption | 600 mA or less (5.0 V DC) | |||
Function Status output Pulse type output Pulse width output Time proportional ON/OFF | Output function of ON/OFF status Pulse type output function of status One-shot pluse width output function Time proportional ON/OFF | |||
Signal isolation | Each point | Common minus side every 16 points | Each point | Common minus side every 16 points |
How installed | Installed in the I/O module nest | |||
How connected | Connected to the I/O module nest terminal with M4 screws | KS2 or KS3 cable | KS9 or KS10 cable | |
CPU halt status / Communi- cation bus termination status | Detection time and output mode can be set when selecting the abnormal detection mode. | |||
Terminal board | - | TE16 | TE32 |
*1: Specify the option code “/CE1" to comply with the EMC Standards.
*2: Output hold action of ADM51T-2, ADM52T-2, ADM51C-2, ADM52C-2, is effective in status output mode.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
商鋪:http://www.aboay.com/st148178/
主營產品:現場儀表,控制器,記錄儀,數據采集儀器,生產控制儀器,環境分析儀表,DCS系統卡件,電子測量儀器.
環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
廣州乘方自動化設備有限公司