一、丹富斯氣動絲扣角座閥/氣動角座閥參數

本產品是我公司結合現代化工業應用研發而成的新一代氣動角座閥，它廣泛用于食品和化學過程，滅菌機，高壓消毒器，干洗機，啤酒生產線。與傳統角座閥相比。氣動角座閥外部先導角座閥 , 溢流口與滑塊間有自調節密封壓蓋 , 閥體角座結構可實現較大流量 , 特別是與普通截止閥相比時。

二、丹富斯氣動絲扣角座閥/氣動角座閥參數

1、可視位置指示：可接限位開關或緊急手動裝置。

2、容易安裝：氣動頭可旋轉360 º。可方便地安裝一到二個限位開關。

3、*的氣動控制器：加厚工程塑料外殼，安全可靠。低磨損的活塞結構，容量大而低耗氣量。內部元件自潤滑，免維護。

4、具有多種控制方式：常開、常閉、雙動。

5、要求更小的氣動執行器：流體從閥桿上方流入時，可選更小的控制頭。

6、容易連接：MAMUR標準連接，嵌入式金屬接頭。

7、長壽命導桿：閥桿契形特氟隆（PTEE）密封，避免贓物導入。自潤滑，免維護。閥桿經特別處理以確保*固定，并能自動校正位置。

8、無水錘作用，流體從閥桿下方流入時，水錘（水沖擊力）被吸收。

9、*的閥體機構：流量比普通角座大30%，體積更小，流體流態更優。不銹鋼316閥體，特氟隆密封，耐高溫，耐腐蝕。壽命高達七百萬次。

三、氣動角座閥 主要外形尺寸

A pneumatic Angle seat valve, Dan fuss

This product is my company combined with modern industrial application research and development of a new generation of pneumatic Angle seat valve, it is widely used in food and chemical processes, sterilization machine, high pressure sterilizer, dry cleaners, beer production lines. Compared with the traditional Angle seat valve. Pneumatic Angle seat valve outside the guide Angle seat valve, overflow mouth and the sliding block with self-adjusting gland, Angle of the valve seat structure which can realize large flow, especially when compared with the normal globe valves.

Second, Dan fuss pneumatic Angle seat valve characteristics

1, the visual position indicator: the limit switch or emergency manual device.

2, easy to install: pneumatic head can rotate 360 DHS. Can easily install one or two limit switches.

3, advanced pneumatic controller: thickening engineering plastics shell, safe and reliable. Low wear of the piston structure, large capacity and low volume. Internal components self-lubrication, maintenance free.

4, with a variety of control mode: normally open, normally closed, double-action.

5, require a smaller pneumatic actuators: the fluid flow from the stem above, optional smaller control head.

6, easy to connect: MAMUR standard connection, embedded metal joint.

7, long-life guide: stem wedge fluoro lung (PTEE) seal, avoid stolen goods import. Since the lubrication and maintenance free. Stem by special treatment to ensure that the best fixed, and can automatic correction.

8, no water hammer effect, fluid flow from the stem below, the water hammer (water impact) is absorbed.

9, advanced valve mechanism: flow Angle seat 30% larger than normal, smaller volume, fluid flow better. 316 stainless steel body, teflon sealing, high temperature resistance, corrosion resistance. Life is as high as seven million times.