產品結構特點 Construction features

1) 流體阻力小  閘閥閥體內部介質通道是直通的，介質流經閘閥時不改變其流動方 向，因而流動阻力較?。?/p>

2) 啟閉較省力  啟閉時閘板運動方向與介質流動方向相垂直，閘閥的啟閉較為省力；

3) 介質流動方向一般不受限制介質可以從閘閥兩側任意方向流過，均能達到接通或 截?cái)嗟哪康?，便于安裝，適用于介質的流動方向可能改變的管路中；

4) 密封面磨損小  閘閥的閥體上設有導向機構，可防止閘板在開啟或關閉時旋轉， 從而保證密封面相應對準，并使閘板在未達到關閉位置之前不與閥座摩擦，從而減 少密封面的磨損；

5) 結構簡單  閘閥的形狀結構比較簡單，制造工藝性較好，結構長度比較短。

6) 填料室設有真空密封結構，具有自脹壓緊作用，并且密封采用高強膨脹材料密封，使系統與大氣隔離，具有很好的系統氣密封性。

1) The internal medium channel of the fluid resistance small gate valve body is straight through, and the flow direction is not changed when the medium flows through the gate valve, thus the flow resistance is smaller.

2) The movement direction of the gate is perpendicular to the flow direction of the medium when the opening and closing are more efficient than the other, and the gate valve's opening and closing are more efficient;

3) Medium flow direction is generally not restricted medium can flow from the gate on both sides of any direction, it can achieve the purpose of connected or truncate,easy to install, suitable for medium may change the direction of current flow in pipeline;

4) Sealing surface wear small gate valve body is equipped with guide mechanism,can prevent the disc rotate in open or closed, to ensure that corresponding alignment on sealing surface, and make the disc in the closed position has not been achieved before no friction with the valve seat, thereby reducing the wear of sealing surface;

5) The structure of simple gate valve is relatively simple, the manufacturing process is better and the structure length is shorter.

6) The packing chamber is equipped with vacuum seal structure, which has self-expanding pressure and compaction, and sealing with high pressure expansion material, so that the system is completely isolated from the atmosphere, and has a good system gas seal.

產品特征 Spericfications

適用介質：水、氣、油品、天然氣和酸堿腐蝕性介質

適用溫度：-196~425℃

驅動方式：手動、氣動、電動等

公稱壓力：1.0~4.0MPa

公稱通徑：DN50~1200mm

Applicable media: water, gas, oil, gas and acid and alkali corrosive medium

Applicable temperature: -196~425℃

Driver: manual, pneumatic, electric, etc

Nominal pressure: 1.0~4.0MPa

Nominal size: DN50~1200mm

技術規范 Technical specification

試驗壓力 Test prssure

閘閥結構長度和外接尺寸 Main connection dimensions